PIC12F629解密——PIC解密

    PIC12F629解密等PIC系列单片机解密是芯谷科技的优势解密项目之一，目前，针对PIC全系列单片机，我们均能提供高可靠性、高准确性的解密方案，而且我们在解密方案的选择与确定时，会综合考虑单片机本身的性能特征及客户的具体需求，并在解密成本及周期上进行严格控制，致力于为广大客户提供高可靠性的解密服务。
    有PIC12F629单片机解密需求者请直接与我们联系咨询更多解密详情
    芯片解密咨询电话：0755-82815425，33348608
    咨询QQ：582614144 ，840933209
    Email：boxkeji@126.com
    PIC12F629单片机基本性能特征介绍
　　Special Microcontroller Features:
　　Internal and external oscillator options
　　- Precision Internal 4 MHz oscillator factory calibrated to ±1%
　　- External Oscillator support for crystals and resonators
　　- 5 μs wake-up from SLEEP, 3.0V, typical
　　Power saving SLEEP mode
　　Wide operating voltage range - 2.0V to 5.5V
　　Industrial and Extended temperature range
　　Low power Power-on Reset (POR)
　　Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
　　Brown-out Detect (BOD)
　　Watchdog Timer (WDT) with independent oscillator for reliable operation
　　Multiplexed MCLR/Input-pin
　　Interrupt-on-pin change
　　Individual programmable weak pull-ups
　　Programmable code protection
　　High Endurance FLASH/EEPROM Cell
　　- 100,000 write FLASH endurance
　　- 1,000,000 write EEPROM endurance
　　- FLASH/Data EEPROM Retention: > 40 years
　　High Performance RISC CPU:
　　Only 35 instructions to learn
　　- All single cycle instructions except branches
　　Operating speed:
　　- DC - 20 MHz oscillator/clock input
　　- DC - 200 ns instruction cycle
　　Interrupt capability
　　8-level deep hardware stack
　　Direct, Indirect, and Relative Addressing modes
    Peripheral Features:
　　6 I/O pins with individual direction control
　　High current sink/source for direct LED drive
　　Analog comparator module with:
　　- One analog comparator
　　- Programmable on-chip comparator voltage reference (CVREF) module
　　- Programmable input multiplexing from device inputs
　　- Comparator output is externally accessible
　　Analog-to-Digital Converter module (PIC12F675):
　　- 10-bit resolution
　　- Programmable 4-channel input
　　- Voltage reference input
　　Timer0: 8-bit timer/counter with 8-bit programmable prescaler
　　Enhanced Timer1:
　　- 16-bit timer/counter with prescaler
　　- External Gate Input mode
　　- Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC mode selected
　　In-Circuit Serial ProgrammingTM (ICSPTM) via two pins