有DS2441解密需求者请与深圳芯片解密研究所联系，我们专业的解密技术团队将针对您的具体需求提供安全可靠、极具成本控制与周期控制优势的解密方案。这里，我们提供对DS2441单片机功能特征的详细介绍，供客户及广大电子工程师参考借鉴。
芯片解密咨询电话：0755-82815425，82815425
咨询QQ：582614144，1258381957
Email：boxsale@126.com
关于DS2441单片机
The DS2441 1-Cell Li-Ion Battery Manager provides all essential functions for monitoring, protecting and managing one-cell lithium-ion battery packs. The DS2441 constantly measures cell voltage, current,and temperature, and automatically takes action to disable charging and/or discharging of the cell to protect it when undesirable conditions arise.Via its 1-Wire interface, the DS2441 provides the host system access to identification information, status data, configuration and control settings, instrumentation registers, and general purpose data storage. Each DS2441 has a factory-programmed 64-bit ROM ID which allows the host system to verify the authenticity of the battery pack as well as a factory-programmed 16-bit manufacturing ID which can be used to encode assembly location, cell chemistry and other information. A full set of status information in the DS2441 keeps the host informed about protection conditions, remaining capacity and other matters.Configuration and control fields in the device allow the host to disable charging and/or discharging, put the battery pack in a low-power mode, and set various timing parameters. In addition, instrumentation registers on the chip present the host with high-accuracy temperature, voltage, and current measurements as well as information on remaining capacity and cycle life. Thirty-two bytes of general purpose memory in the DS2441 are available for storing pack-specific information.
When the cell voltage reaches the undervoltage cutoff, the DS2441 automatically enters a low-power mode in which it consumes only 1μA of battery current. When a battery charger is applied to the pack,the DS2441 automatically leaves its low-power mode to support charging. A refresh feature in the DS2441 allows even the most severely discharged battery packs to be refreshed and recharged. The DS2441 also features a programmable I/O pin that allows the host system to sense and control other electronics in the pack, such as vibration motors, speakers and LEDs.
DS2441 FEATURES：
•Provides all identification, information,instrumentation and protection functions needed in a lithium-ion battery pack
•Supports one-cell battery packs
•Protects cell from:
– overvoltage (overcharge)
– undervoltage (overdischarge)
– overcurrent (charging and discharging)
– high temperatures (thermal runaway)
•Current accumulator tracks remaining battery capacity in 0.5% increments
•Voltage measurement with 10 mV accuracy
•Temperature measurement with ±2°C accuracy eliminates need for thermistor
•32-byte user memory stores battery data
•64-bit ROM ID uniquely identifies each battery pack
•1-Wire. interface carries all commands and data via a single wire
•Programmable alarm warns when cell is nearly discharged
•Programmable I/O pin supports LEDs,vibration motors and other features
•Operating temperature range: -40°C to +85°C
•10kV ESD rating
