深圳芯片解密研究所系国内IC解密行业的鼻祖
24小时咨询电话:189-2383-0090

当前位置:首页>可解IC库 >> ATMEL单片机解密 >> AT90CAN128-AI解密

AT90CAN128-AI解密

    AT90CAN128-AI单片机是ATMEL系列AVR单片机之一,有AT90CAN128-AI单片机解密需求者请直接与深圳芯片解密研究所联系:
    芯片解密咨询电话:086-0755-82815425
业务邮箱:xingu2010@126.com业务QQ:1123949653  471752860
 AT90CAN128-AI Features
   High-performance, Low-power AVR 8-bit Microcontroller
   Advanced RISC Architecture
  – 133 Powerful Instructions – Most Single Clock Cycle Execution
  – 32 x 8 General Purpose Working Registers + Peripheral Control Registers
  – Fully Static Operation
  – Up to 16 MIPS Throughput at 16 MHz
  – On-chip 2-cycle Multiplier
   Non volatile Program and Data Memories
  – 128K Bytes of In-System Reprogrammable Flash
  Endurance: 10,000 Write/Erase Cycles
  – Optional Boot Code Section with Independent Lock Bits
  Selectable Boot Size: 1K Bytes, 2K Bytes, 4K Bytes or 8K Bytes
  In-System Programming by On-Chip Boot Program (CAN, UART)
  True Read-While-Write Operation
  – 4K Bytes EEPROM (Endurance: 100,000 Write/Erase Cycles)
  – 4K Bytes Internal SRAM
  – Up to 64K Bytes Optional External Memory Space
  – Programming Lock for Software Security
   JTAG (IEEE std. 1149.1 Compliant) Interface
  – Boundary-scan Capabilities According to the JTAG Standard
  – Programming Flash (Hardware ISP), EEPROM, Lock & Fuse Bits
  – Extensive On-chip Debug Support
   CAN Controller 2.0A & 2.0B
  – 15 Full Message Objects with Separate Identifier Tags and Masks
  – Transmit, Receive, Automatic Reply and Frame Buffer Receive Modes
  – 1Mbits/s Maximum Transfer Rate at 8 MHz
  – Time stamping, TTC & Listening Mode (Psying or Autobaud)
   Peripheral Features
  – Programmable Watchdog Timer with On-chip Oscillator
  – 8-bit Synchronous Timer/Counter-0
  10-bit Prescaler
  External Event Counter
  Output Compare or 8-bit PWM Output
  – 8-bit Asynchronous Timer/Counter-2
  10-bit Prescaler
  External Event Counter
  Output Compare or 8-Bit PWM Output
  32Khz Oscillator for RTC Operation
  – Dual 16-bit Synchronous Timer/Counters-1 & 3
  10-bit Prescaler
  Input Capture with Noise Canceler
  External Event Counter
  3-Output Compare or 16-Bit PWM Output
  Output Compare Modulation
  – 8-channel, 10-bit SAR ADC
  8 Single-ended channels
  7 Differential Channels
  2 Differential Channels With Programmable Gain at 1x, 10x, or 200x
  – On-chip Analog Comparator
  – Byte-oriented Two-wire Serial Interface
  – Dual Programmable Serial USART
  – Master/Slave SPI Serial Interface
  Programming Flash (Hardware ISP)
   Special Microcontroller Features
  – Power-on Reset and Programmable Brown-out Detection
  – Internal Calibrated RC Oscillator
  – 8 External Interrupt Sources
  – 5 Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down & Standby
  – Software Selectable Clock Frequency
  – Global Pull-up Disable
  I/O and Packages
  – 53 Programmable I/O Lines
  – 64-lead TQFP and 64-lead QFN
   Operating Voltages
  – 2.7 - 5.5V
   Operating temperature
  – Industrial (-40°C to +85°C)
   Maximum Frequency
  – 8 MHz at 2.7V - Industrial range
  – 16 MHz at 4.5V - Industrial range