深圳芯片解密研究所系国内IC解密行业的鼻祖
24小时咨询电话:189-2383-0090

当前位置:首页>可解IC库 >> ATMEL单片机解密 >> AT89C51RB2解密

AT89C51RB2解密

    深圳芯片解密研究所提供AT89C51RB2解密服务,我们长期以技术研究和诚信优质的技术服务为目的,所有芯片解密、IC解密、单片机解密服务仅限合法用途,有AT89C51RB2解密需求者请直接与我们联系:
    芯片解密咨询电话:086-0755-33348608,82816682
    咨询QQ:582614144
    Email:
boxsale@126.com
    AT89C51RB2 Description
  The AT89C51RB2/RC2 is a high-performance Flash version of the 80C51 8-bit microcontrollers.It contains a 16K or 32K Bytes Flash memory block for program and data.The Flash memory can be programmed either in parallel mode or in serial mode with the ISP capability or with software. The programming voltage is internally generated from the standard VCC pin.The AT89C51RB2/RC2 retains all features of the 80C52 with 256 Bytes of internal RAM, a 9-source 4-level interrupt controller and three timer/counters.
  AT89C51RB2 Features
  80C52 Compatible
  – 8051 Pin and Instruction Compatible
  – Four 8-bit I/O Ports
  – Three 16-bit Timer/Counters
  – 256 Bytes Scratch Pad RAM
  – 9 Interrupt Sources with 4 Priority Levels
  – Dual Data Pointer
  Variable Length MOVX for Slow RAM/Peripherals
  ISP (In-system Programming) Using Standard VCC Power Supply
  Boot ROM Contains Low Level Flash Programming Routines and a Default Serial
  Loader
  High-speed Architecture
  – 48 MHz in Standard Mode and Internal Code Execution (40 MHz for external code)
  – 24 MHz in X2 Mode and internal code execution (20 MHz for external code)
  – 16K/32K Bytes On-chip Flash Program/Data Memory
  – Byte and Page (128 Bytes) Erase and Write
  – 100K Write Cycles
  On-chip 1024 Bytes Expanded RAM (XRAM)
  – Software Selectable Size (0, 256, 512, 768, 1024 Bytes)
  – 256 Bytes Selected at Reset for TS87C51RB2/RC2 Compatibility
  Keyboard Interrupt Interface on Port P1
  SPI Interface (Master/Slave Mode)
  8-bit Clock Prescaler
  Improved X2 Mode with Independent Selection for CPU and Each Peripheral
  Programmable Counter Array 5 Channels
  – High-speed Output
  – Compare/Capture
  – Pulse Width Modulator
  – Watchdog Timer Capabilities
  Asynchronous Port Reset
  Full Duplex Enhanced UART
  Dedicated Baud Rate Generator for UART
  Low EMI (Inhibit ALE)
  Hardware Watchdog Timer (One-time Enabled with Reset-out)
  Power Control Modes
  – Idle Mode
  – Power-down Mode
  – Power-off Flag
  Power Supply:
  – 2.7 to 3.6 (3V Version)
  – 2.7 to 5.5V (5V Version)
  Temperature Ranges: Commercial (0 to +70°C) and Industrial (-40°C to +85°C)
  Packages: PDIL40, PLCC44, VQFP44