深圳芯片解密研究所系国内IC解密行业的鼻祖
24小时咨询电话:189-2383-0090

当前位置:首页>解密优惠 >> LPC2119FBD64解密最新优惠信息

LPC2119FBD64解密最新优惠信息

    LPC2119FBD64是PHILIPS系列疑难解密单片机系列之一,LPC2119FBD64单片机解密在行业内一直由于解密难度较大,解密费用较高,成为许多解密公司及客户的一大困扰,深圳芯片解密研究所下属的专业PHILIPS解密攻关实验室经过集中技术开发和破解,目前已经能够为客户提供高可靠性和低成本的LPC2119FBD64解密方案。
    依托最新技术研究成果,深圳芯片解密研究所推出LPC2119FBD64解密最新优惠,凡在我研究所进行LPC2119FBD64解密项目合作的所有新老客户均可以享受LPC2119FBD64解密低价优惠,同时保证解密成功率100%,解密周期短,可靠性强,有解密需求者请与我们联系:
    解密咨询电话:086-0755-82815425,82815425
    联系人:魏小姐
    咨询QQ:582614144
    LPC2119FBD64单片机主要特征介绍:
  16/32-bit ARM7TDMI-S microcontroller in a tiny LQFP64 package.
  16 kB on-chip Static RAM.
  128/256 kB on-chip Flash Program Memory. 128-bit wide interface/accelerator
  enables high speed 60 MHz operation.
  In-System Programming (ISP) and In-Application Programming (IAP) via on-chip
  boot-loader software. Flash programming takes 1 ms per 512 byte line. Single
  sector or full chip erase takes 400 ms.
  EmbeddedICE-RT interface enables breakpoints and watch points. Interrupt
  service routines can continue to execute while the foreground task is debugged
  with the on-chip RealMonitor? software.
  Embedded Trace Macrocell enables non-intrusive high speed real-time tracing of
  instruction execution.
  Two interconnected CAN interfaces with advanced acceptance filters.
  Four channel 10-bit A/D converter with conversion time as low as 2.44 ms.
  Multiple serial interfaces including two UARTs (16C550), Fast I2C (400 kbits/s)
  and two SPIs
  60 MHz maximum CPU clock available from programmable on-chip
  Phase-Locked Loop with settling time of 100 ms.
  Vectored Interrupt Controller with configurable priorities and vector addresses.
  Two 32-bit timers (with four capture and four compare channels), PWM unit (six
  outputs), Real Time Clock and Watchdog.
  Up to forty-six 5 V tolerant general purpose I/O pins. Up to nine edge or level
  sensitive external interrupt pins available.
  On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz.
  Two low power modes, Idle and Power-down.
  Processor wake-up from Power-down mode via external interrupt.
  Individual enable/disable of peripheral functions for power optimization.
  Dual power supply:
  CPU operating voltage range of 1.65 V to 1.95 V (1.8 V ±0.15 V).
  I/O power supply range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/Opads.